RyanB03 Posted January 26, 2016 Share Posted January 26, 2016 Hey guys. So I've had a few topics on here, but those have gone down the drain already, so I've decided to try my luck at an NHL Redesign. As I usually do, I'll start in alphapetical order with Anaheim and Arizona! The first set is the home and away and the second set is the alternate then the throwback. Anaheim Primary Alt/Throwback Arizona Primary Alt/Throwback Anaheim: Used the same sleeve stripe for sleves and added it to torso Used old Mighty Ducks logo but recolored it Throwback is the old Mighty Ducks one Arizona: Used entire coyote as logo Had triangular pattern for stripe, thanks to TrueNorth for the inspiration Alternate logo was a misc. logo that I recolored to their current color scheme Throwback uses old logo and same pattern as home and away Link to comment Share on other sites More sharing options...
RyanB03 Posted January 26, 2016 Author Share Posted January 26, 2016 Oh crap I didn't realize I was in this thread and not the concepts one, my bad, just ignore it Link to comment Share on other sites More sharing options...
RyanB03 Posted January 27, 2016 Author Share Posted January 27, 2016 Bump, now we are in the right category... Link to comment Share on other sites More sharing options...
RyanB03 Posted January 27, 2016 Author Share Posted January 27, 2016 Bump... again, I'd like some comments here without me having to bump every day Link to comment Share on other sites More sharing options...
KittSmith_95 Posted January 28, 2016 Share Posted January 28, 2016 These are actually all great jerseys, but you have an issue here: The stitching layer is supposed to go behind the jerseys, not on top. Other than that, this is actually a great start and 2 solid sets. Link to comment Share on other sites More sharing options...
timberwolf Posted January 28, 2016 Share Posted January 28, 2016 These are solid. I echo @KittSmith_95 the stitching needs to be under the striping. Link to comment Share on other sites More sharing options...
RyanB03 Posted January 28, 2016 Author Share Posted January 28, 2016 52 minutes ago, timberwolf said: These are solid. I echo @KittSmith_95 the stitching needs to be under the striping. 56 minutes ago, KittSmith_95 said: These are actually all great jerseys, but you have an issue here: The stitching layer is supposed to go behind the jerseys, not on top. Other than that, this is actually a great start and 2 solid sets. So just behind the stripes or the entire jersey? @timberwolf @KittSmith_95 Link to comment Share on other sites More sharing options...
timberwolf Posted January 28, 2016 Share Posted January 28, 2016 The stitching can't go over the design. Like stripes, numbers, logos...any other part (like the normal colouring of the jersey) is fine. Link to comment Share on other sites More sharing options...
RyanB03 Posted January 28, 2016 Author Share Posted January 28, 2016 All right, fixed the stitching problem here: Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.